CarPro CQuartz UK 3.0 Ceramic Coating 50ml Kit
CarPro Cquartz UK 3.0 Ceramic Coating 50ml Kit
Coat your car with the glossiest and hardest ceramic coating available on the open market!
Now easy to wipe off even in hot humid climates!
The next evolution of ceramic coating technology is here! CQuartz UK is world renowned for being the strongest ceramic coating on the open market! Rivaling many "pro grade" products, CQuartz UK has been embraced by fans all across the world however CarPro is never one to wait for others to catch up so they set out to improve CQuartz UK even further! The new and improved CQuartz UK 3.0 now features easy use in all climates!
In our REAL WORLD tests we have found CQuartz to outlast the competition in side by side, apples to apples torture tests. One of the many reasons we continue to offer CQuartz as our ceramic coating brand of choice is their commitment to innovation and the simple but critically important fact that CarPro continues to tell us and you the truth and base their claims on reality.
CQuartz UK 3.0 offers incredible resistance to chemicals, salt, and environmental damage as well as provide excellent UV protection! The high silica-quartz content creates a hard glassy layer across painted or gel-coat surfaces. CQuartz UK adds incredible levels of depth to the paint along with unbelievable water and dirt repellency and a rugged durability measured in years!
(1) 50ml bottle of CQuartz UK 3.0 (Use 15ml+/- per coat - average size car)
(1) CarPro Foam Applicator Block
(4) 4" MF Suede applicators
Now easy to use in a wide range of temps!
Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers
Extremely high Sio2 Quartz content
Deep gloss that lasts!
Easy maintenance with "self cleaning" properties (Stays cleaner than other products on the market)
Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
Repels UV rays, water, oils, dirt, and contaminants
Durability: 2 years or more
Average Thickness: 1~2 Micron per coat
Coverage 15ml per coat +/-
Water contact angle: 110°
Recommended working temperatures: 40F to 100F
If contamination exists it is recommended that you Iron X and clay your vehicle before polishing.
To gain the most from Cquartz it is recommended that your vehicle have all surfaces 100% clean and paint polished to a high level
Use CarPro Reflect to achieve an incredible high gloss finish in less time with no fillers
Use CarPro Eraser to remove all oils leftover from Reflect - This is critical to ensure durability of CQuartz
Directions: (Use only in good ambient lighting)
Wrap a 4" mf Suede around the grey side of applicator block
Shake CQuartz UK
Slowly open bottle and drag one line of product across applicator
Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions
Buff off as soon as it flashes (within 1-5 minutes depending) using a CarPro No Lint Ultra Towel 16" x 16"
Be sure to remove all excess residue and only then do you move to the next section
Switch out applicators regularly
Apply Reload before 1 hour. Wait until next day for Reload if you miss the 30-60 minute window
Keep surface dry for at least one hour after application (For best results keep dry 24 hours)
Gently wipe any water off the surface during the first 24 hours after application
Avoid detergents and chemicals for 5 days after application
If it is dry and the air is clean outside then you may park the vehicle in direct sun after application to speed the curing
Do not apply in direct sun or on hot surface
Do not re-use 4" Suede applicators
Do not re-use the towels you used to buff off with on paint
Wear hand protection
Wear respiratory protection such as painters mask